64
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (optional) to
DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital
connection, video and audio signals are transmitted in digital form for high-quality
editing. You cannot dub the screen indicators.
(1)
Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2)
Set the input selector on the VCR to DV IN if it is available. Refer to the
operating instructions of your VCR for more information.
(3)
Set the POWER switch to VCR.
(
4
)
Play back the recorded tape on your camcorder.
(5)
Start recording on the VCR.
Refer to the operating instructions of your VCR for more information.
When you have finished dubbing a tape
Press
x
on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable (DV connecting cable).
See page 94 for more information about i.LINK.
The following functions do not work during digital editing :
– Picture effect
– Digital effect
– Tape PB ZOOM
If you record a playback pause picture via the DV IN/OUT jack
The recorded picture becomes rough. Also, when you play back the recorded pictures
on other video equipment, the picture may jitter.
S VIDEO
DV
Dubbing a tape
DV IN/OUT
DV IN/OUT
: Signal flow
(optional)
Summary of Contents for DCR-TRV130 - Digital8 Camcorder
Page 111: ......
Page 112: ...Sony Corporation Printed in Japan 3 0 6 5 6 5 1 1 1 ...
