— 14 —
DV MECHANICAL ADJUSTMENT MANUAL VII
3-3. Cassette Compartment Assy
1.
Removal procedure
1)
Set the
[EJ]
mode.
2)
Press the cassette compartment down halfway. Pull the cassette
compartment damper
1
in the direction of the arrow
A
. Then
rotate it in the
B
direction, and remove it in the direction of
C
.
3)
Remove the two screws (special head screw M1.4
×
1.4)
2
.
4)
Remove the LS chassis block assy
3
in the direction of the
arrow
D
.
5)
Remove the pin
E
and groove
F
of the cassette compartment
assy
4
from the LS chassis groove
G
and pin
H
. Then remove
the cassette compartment block assy
4
.
6)
Remove the tension spring (POP UP T) (black)
5
.
7)
Remove the tension spring (POP UP S) (silver)
6
.Then remove
the cassette compartment assy
7
.
2.
Attachment procedure
1)
Set the
[ULE]
mode.
2)
Install the tension spring (cassette compartment S) (POP UP
S) (silver)
6
in to the cassette compartment assy
7
. (The
spring should be hooked on the front stay with the spring end
facing upward.)
3)
Install the tension spring (cassette compartment T) (POP UP
T) (black)
5
in to the cassette compartment assy
7
. (The
spring should be hooked on the front stay with the spring end
facing upward.)
4)
Install the pin
E
and groove
F
of the cassette compartment
assy
4
into the LS chassis groove
G
and pin
H
.
5)
In the status that the LS block assy
3
is kept open, insert it
into the grooves
I
and
J
of the LS chassis block assy.
6)
Close the LS chassis block assy
3
in the direction opposite to
the arrow
D
, and install it with the two screws (special head
screw M1.4
×
1.4)
2
.
Tightening torque: 0.059
±
0.01N•m (0.6
±
0.1kgf•cm)
7)
The cassette compartment down halfway. Pass the
K
portion
of the cassette compartment damper
1
through the groove at
the tip of the cassette compartment. Then pull the
L
portion
and fix it using tweezers or something.
A
K
L
B
C
D
Cassette compartment
assy
REMOVING THE CASSETTE
COMPARTMENT DAMPER
7
Cassette compartment assy
6
Extension spring
(pop up S) (silver)
5
Extension spring
(pop up T) (black)
1
Cassette
compartment damper
3
LS frame
Pin
E
Pin
H
1
Cassette
compartment damper
2
Two screws
(M1.4
×
1.4)
4
Cassette
compartment
block assy
Groove
F
Groove
J
Tip groove of cassette
compartment assy
Groove
G
Groove
I
Key Points in Re-assembling
Points
to be noted
The spring hook
faces downward
The spring
hook faces
downward
Summary of Contents for DCR-PC350 - Digital Handycam Camcorder
