Sony DCR-HC15 Operation Manual Download Page 19

Page: 19 / 116

Getting Started

Operation buttons on each display

When the POWER switch is set to CAMERA

PAGE1

SPOT FOCUS, MENU, FOCUS, FADER, END SCH, SPOT METER,
EXPOSURE

PAGE2

SELFTIMER, LCD BRT, VOL

When the POWER switch is set to VCR

PAGE1

MENU, LCD BRT, VOL, END SCH

PAGE2

DATA CODE

PAGE3

V SPD PLAY, A DUB CTRL, REC CTRL

Notes

•When using the touch panel, press operation buttons lightly with your finger,

supporting the LCD panel from the back side of it.

•Do not press the LCD screen with sharp objects such as a pen.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You

can turn on or off the display with DSPL/BATT INFO on your camcorder.

When executing each item

The green bar appears above the item.

If the items are not available

The color of the items changes to gray.

When using the viewfinder

You can also operate with the touch panel (p. 56).

Step 3 Using the touch panel

Summary of Contents for DCR-HC15





















































































































Search results

Summary of Contents for DCR-HC15

Reviews:

Related manuals for DCR-HC15

Brands by name

Popular brands

Sony DCR-HC15, Operation Manual

Search results

Summary of Contents for DCR-HC15

Reviews:

Related manuals for DCR-HC15

Brands by name

Popular brands