manualshive.com logo in svg

Sony DCR-HC15, Operation Manual, Page: 91 / 116

Share
Download
Sony DCR-HC15 Operation Manual Download Page 91

91

Troubleshooting

Symptom

Cause and/or Corrective Actions

• The battery pack is not properly installed.

c

Install it properly (p. 12).

• The POWER switch is not set to OFF (CHG).

c

Set it to OFF (CHG) (p. 13).

c

Charge the battery pack fully again (p. 13).

• The battery pack is not properly installed.

c

Install it properly (p. 12).

• Something is wrong with the battery pack.

c

Please contact your Sony dealer or local authorized Sony
service facility.

• DSPL/BATT INFO is pressed.

c

Press the LCD screen lightly.

c

Press DSPL/BATT INFO on your camcorder (p. 33).

c

Adjust the screen (CALIBRATION) (p. 106).

• Moisture has started to condense in your camcorder (p.

103).

c

Remove the battery pack, then install it again (p. 12).

While charging the battery pack,
no indicator appears.
You cannot charge the battery
pack.
The power runs out quickly, even
though the remaining battery time
indicator is full.
While charging the battery pack,
the CHG (charge) lamp flashes.

The buttons do not appear on the
touch panel.

The buttons on the LCD screen do
not work.
The cassette cannot be ejected even
if the cassette lid is open.
The cassette cannot be ejected.

Types of trouble and how to correct trouble

Summary of Contents for DCR-HC15





















































































































Reviews:

No comments