O
th
e
r O
p
era
tions
77
GB
• This function is only for SONY TVs. (This function
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while entering the code.
Selecting the connected
component
You can use a VCR or other components
connected to the VIDEO or SAT jacks on the
rear panel or AUDIO IN jack on the front panel.
Refer to the operation manual supplied with the
components for further information on the
operation.
Press FUNCTION repeatedly until “VIDEO,”
“SAT,” or “AUDIO” appears in the front
panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD
t
TUNER FM
t
TUNER AM
t
VIDEO
t
SAT
t
AUDIO
t
DVD
t
…
Changing the output level of
the sound from the AUDIO IN
jack on the front panel
Depending on the component, distortion occurs
because of the input level when listening to the
component that is connected to the AUDIO IN
jack on the front panel.
Note
Enjoying the Sound of
Other Components
AMP MENU
X/x/c
ENTER
FUNCTION
continued
