Sony DAV-DZ770W Operating Instructions Manual Download Page 69

Page: 69 / 112

Sou

nd Adj

stm

nts

Reinforcing bass frequencies

You can reinforce bass frequencies.

Press DSGX.

Bass frequencies are effectively reinforced.

To turn off the sound effect

Press DSGX again.

Enjoying the sound at low
volume

Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.

Press AMP MENU.

Press

repeatedly until

“AUDIO

DRC”

appears in the front panel

display, then press ENTER or

Press

to select the setting.

• DRC STD: reproduces the sound track

with the kind of dynamic range that the
recording engineer intended.

• DRC MAX: compresses dynamic range

fully.

• DRC OFF: no compression of dynamic

range.

Press ENTER or AMP MENU.

The AMP menu turns off.

• AUDIO DRC only applies to Dolby Digital sources.

Using the Sound Effect

X/x/c

ENTER

AMP MENU

DSGX

Note

Summary of Contents for DAV-DZ770W

















































































































Search results

Summary of Contents for DAV-DZ770W

Reviews:

Related manuals for DAV-DZ770W

Brands by name

Popular brands

Sony DAV-DZ770W, Operating Instructions Manual

Search results

Summary of Contents for DAV-DZ770W

Reviews:

Related manuals for DAV-DZ770W

Brands by name

Popular brands