background image

10

Notes on playback operations of 
DVDs and VIDEO CDs

• Some playback operations of DVDs and 

VIDEO CDs may be intentionally set by 
software producers. Since this player plays 
DVDs and VIDEO CDs according to the 
disc contents the software producers 
designed, some playback features may not 
be available. Also, refer to the instructions 
supplied with the DVDs or VIDEO CDs.

• CDs and VIDEO CDs may be heard louder 

than DVDs even at the same volume 
setting. This is due to the recorded volume 
level intended by the producers. Set the 
volume lower in advance.

Copyrights

This product incorporates copyright 
protection technology that is protected by 
method claims of certain U.S. patents, other 
intellectual property rights owned by 
Macrovision Corporation, and other rights 
owners. Use of this copyright protection 
technology must be authorized by 
Macrovision Corporation, and is intended for 
home and other limited viewing uses only, 
unless otherwise authorized by Macrovision 
Corporation. Reverse engineering or 
disassembly is prohibited.

Notes about the Discs

On handling discs

• To keep the disc clean, handle the disc by its 

edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

On storing

• Do not expose the disc to direct sunlight or 

heat sources such as hot air ducts, or leave 
it in a car parked in direct sunlight as the 
temperature may rise considerably inside 
the car.

• After playing, store the disc in its case.

On cleaning

• Fingerprints or dust on a disc may cause 

deteriorated image or sound quality. Leave 
the disc clean. 

• Wipe the disc with a soft cloth from the 

center out.

• If the disc is very dirty, first wipe it with a 

damp cloth, then wipe it again with a dry 
cloth.

• Do not use solvents such as benzine, 

thinner, commercially available cleaners, or 
anti-static spray intended for vinyl LPs.

Summary of Contents for D-VM1 Operating Instructions (primary manual)

















































































Reviews: