39
Additional information
Symptom
The CD does not play or
“No disc” appears in the
display when a CD is placed
in the CD player.
OPR lamp flashes on the CD
player when you press a
button, and the CD does not
play.
Cannot adjust the volume.
During recording with optical
digital connection, the track
number cannot be recorded
correctly.
The rechargeable batteries
cannot be charged.
Playback starts from the
point you stopped. (resume
function)
Rustling noise is heard from
the CD.
When using with a connected
stereo system, the sound is
distorted or noisy.
Cause and/or corrective action
c
The CD is dirty or defective.
c
Check that the CD is inserted with the label side up. (page 15)
c
Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
c
Close the lid of the battery compartment firmly. (page 33)
c
Make sure the batteries are inserted correctly. (pages 33)
c
Connect the AC power adaptor to an AC outlet securely. (page 15)
c
Press
the jog lever (CD player: Press
u
) after one second or
more has passed since the AC power adaptor was connected.
c
The CD-R/RW is blank.
c
There is a problem with the quality of the CD-R/RW, recording
device, or application software.
c
The buttons are locked. Slide the HOLD switch back. (page 28)
c
AUDIO OUT is set to “LINE.” Adjust the volume using the
volume control on the connected device. (page 31)
c
Set AUDIO OUT to “HP.” Adjust the volume using VOL +/– on
the CD player. (page 31)
c
Record the track number again using a MiniDisc recorder, DAT
recorder, etc. (page 31)
c
See the instruction manual that comes with the recording device.
(page 31)
c
The rechargeable batteries are not inserted in the battery
compartment.
c
The CD is playing. Turn it off.
c
The resume function is working. To start play from the first track,
press the jog lever during stop (CD player: Press and hold
u
)
until the first track starts playing, or open the lid of the CD player.
Or remove all power sources, then insert the batteries or connect
the AC power adaptor again.
(pages 15, 16, 33, 35)
c
Close the lid of the battery compartment firmly. (page 33)
c
AUDIO OUT is set to “LINE.” Adjust the volume of the connected
device. (page 31)
c
AUDIO OUT is set to “HP.” Adjust the volume using VOL +/– on
the CD player. (page 31)
(Continued)
Summary of Contents for D-NE700
Page 43: ...43 Additional information ...
