Sony Cyber-shot DSC-V3 Operating Instructions Manual Download Page 14

Page: 14 / 156

To a wall outlet (wall socket)





Power cord
(mains lead)



Connect the power cord
(mains lead) to the AC Adaptor
and to a wall outlet (wall
socket).

The CHG / lamp lights up when charging
begins.

CHG

CHG/ lamp

The CHG/ lamp goes off when charging
is completed

• After charging the battery pack, disconnect the

AC Adaptor both from the DC IN jack of the
camera and from a wall outlet (wall socket).

Battery remaining indicator

The battery remaining indicator on the
LCD screen shows the remaining shooting
or viewing time.

Remaining indicator

60min

Remaining time

• When you switch the LCD screen on/off, it

takes about one minute for the correct battery
remaining time to appear.

• The displayed remaining time may not

be correct under certain circumstances or
conditions.

Charging time

Approximate time to charge a completely
discharged battery pack using the AC
Adaptor at a temperature of 25°C (77°F).

Battery pack

Charging time (min.)

NP-FR1 (supplied) Approx. 180

• The charging time may become longer under

certain circumstances or conditions.

To remove the battery pack

Battery eject lever

Open the battery/“Memory Stick”/CF
card cover. Slide the battery eject lever in
the direction of the arrow, and remove the
battery pack.

• Be careful not to drop the battery pack when

removing it.

Summary of Contents for Cyber-shot DSC-V3





























































































































































Search results

Summary of Contents for Cyber-shot DSC-V3

Reviews:

Related manuals for Cyber-shot DSC-V3

Brands by name

Popular brands

Sony Cyber-shot DSC-V3, Operating Instructions Manual

Search results

Summary of Contents for Cyber-shot DSC-V3

Reviews:

Related manuals for Cyber-shot DSC-V3

Brands by name

Popular brands