Sony Cyber-shot DSC-V3 Operating Instructions Manual Download Page 13

Page: 13 / 156

Getting started

Charging the battery pack



Open the battery/“Memory
Stick”/CF card cover.

Slide the cover in the direction of the
arrow.

•

Be sure to turn off your camera when

charging the battery pack (page 17).

• Your camera operates with the

“InfoLITHIUM” NP-FR1 battery pack (R
type) (supplied). You can use only R type
battery pack (page 146).



mark

Battery eject lever



Install the battery pack, then
close the battery/“Memory
Stick”/CF card cover.

Make sure the battery pack is fi rmly
inserted all the way, then close the cover.

Battery insertion slot

Insert the battery pack
so that tip of the



marks on the side of the
battery pack face the tip
of the



mark on the

battery insertion slot.

• The battery pack is easily inserted by pushing

the battery eject lever at the front of the battery
compartment toward the LCD screen.

DC IN jack cover

AC Adaptor

DC plug



Open the DC IN jack cover
and connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.

Connect the plug with the



mark facing

left.

• Do not short the DC plug of the AC Adaptor

with a metallic object, as this may cause
malfunction.

• Clean the DC plug of the AC Adaptor with a

dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.

Summary of Contents for Cyber-shot DSC-V3





























































































































































Search results

Summary of Contents for Cyber-shot DSC-V3

Reviews:

Related manuals for Cyber-shot DSC-V3

Brands by name

Popular brands

Sony Cyber-shot DSC-V3, Operating Instructions Manual

Search results

Summary of Contents for Cyber-shot DSC-V3

Reviews:

Related manuals for Cyber-shot DSC-V3

Brands by name

Popular brands