Sony Cyber-shot DSC-HX99, Help Manual

Page: 97 / 511

Help Guide
Digital Still Camera
DSC-HX99
Func. of Touch Oprtn: Touch Shutter
When you shoot using the monitor, the camera automatically focuses on the point you touch and shoots a still image.
Set MENU →
(Setup) → [Touch Operation] to [On] in advance.
Hint
You can operate the shooting functions below by touching the monitor:
Shooting burst images using the touch shutter
When [Drive Mode] is set to [Cont. Shooting] or [Spd Priority Cont.], you can record burst images while touching the monitor.
Shooting continuous bracket images using the touch shutter
The product shoots three images while automatically shifting the exposure from base, to darker, and then to lighter. When
[Drive Mode] is set to [Cont. Bracket], keep touching the monitor until the shooting ends. After the recording you can select the
image you prefer.
Note
The [Touch Shutter] function is unavailable in the following situations:
During viewfinder shooting
When the shooting mode is set to [Movie]
When the shooting mode is set to [Sweep Panorama]
During [Smile Shutter] mode
When [Focus Mode] is [Manual Focus]
When [Focus Area] is [Flexible Spot]
When [Focus Area] is [Expand Flexible Spot]
While using the digital zoom function
While using the [
Clear Image Zoom]
Related Topic
Touch Operation
Touch Panel/Pad
4-745-578-11(1) Copyright 2018 Sony Corporation
Select MENU → (Camera Settings2) → [Func. of Touch Oprtn] → [Touch Shutter].
1
Touch the icon on the monitor while the shooting screen is displayed.
The mark to the left of the icon turns orange.
To cancel [Touch Shutter], touch the icon again.
2
Touch the subject to focus on.
When the subject you touched is in focus, a still image is recorded.
3
97