![background image](http://html.mh-extra.com/html/sony/cmt-m333nt/cmt-m333nt_operating-instructions-manual_420400059.webp)
T
ro
u
b
les
hooti
n
g
59
GB
Group Full!
An attempt was made to create a new group in
excess of the maximum number of groups, or there
are insufficient characters for updating the group
management information.
Impossible
• You tried to make an impossible editing
operation.
• You cannot perform Net MD operations during
timer playback.
• You cannot combine or erase the tracks due to the
system limitations of MDs.
Incomplete!
Adjustment of the recording level after recording or
Fade-in and Fade-out procedures have failed since
the system was either subject to vibration or there is
a damaged or dirty disc in the tray.
Initialize
The power was off for a long time, so the system is
initializing itself.
Name Full!
There is no more space to store track, disc or group
titles.
No Change
While attempting to change the recording level after
recording, you pressed ENTER/YES without
actually changing the recording level, so no change
was made.
No Disc
There is no disc in the MD deck.
OVER
You have reached the end of the MD while pressing
M
during pause mode.
Push STOP!
You pressed an invalid button during playback.
—Rehearsal—
The MD is playing the specified point for
confirmation during the A-B Erase Function and the
Divide Function (pages 30 and 33).
Retry
A reading failure has occurred, and the system is
trying to read the data again.
S.F Edit!
You attempted to perform another operation while
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
S.F Edit NOW
You pressed
?/1
while in S.F Edit (changing the
recording level after recording, Fade-in, Fade-out)
mode.
Smart Space
The signal was input again after silence continued
for 3 or more but less than 30 seconds during digital
recording, and the silence was cut to 3 seconds.
Step Full!
You tried to program 26 or more tracks (steps).
TOC Reading
The MD deck is reading the TOC information of the
MD.
TOC Writing
The MD deck is writing the information of recorded
or edited contents.
Track End
You have reached the end of the track while
adjusting the dividing point during the Divide
Function.
Tr Protected
Tracks and other data that have been checked out on
Net MD equipment are protected, so you cannot use
some of the MD editing functions.
TAPE
Cannot SYNC!
There is no tape in the tape deck, or the tab has been
removed from the cassette.
No Tab
You cannot record the tape because the tab has been
removed from the cassette.
No Tape
There is no tape in the tape deck.
Timer
OFF TIME NG!
The Daily Timer start and end times are set to the
same time.
OVERLAP!
The Daily Timer setting or the Timer Recording
setting overlaps with part or all of another timer
setting.
continued