40
GB
Mixing and recording sounds
You can “mix” sounds by playing one of the
components and singing or speaking into a
microphone (not supplied).
The mixed sound can be recorded on a tape.
Use buttons on the unit for the operation.
1
Prepare the source you want to mix.
2
Load a recordable tape.
3
Press DIRECTION on the unit
repeatedly to select “
g
” to record on
one side of the tape only. Select “
h
”
(or “
j
”) to record on both sides.
4
Press TAPE/
hH
repeatedly to select
the recording side, then press
x
.
If you select both sides or the front side for
recording, press TAPE/
hH
to display
“
N
”, then press
x
. If you choose to record
on the reverse side, press TAPE/
hH
again to display “
n
”, then press
x
.
5
Press the function button of the source
you want to record.
6
Press
z
START.
The tape deck stands by for recording.
“REC” flashes.
7
Press
z
START, then start singing,
speaking or playing the desired
source.
Recording starts.
To stop recording
Press
x
.
Note
When you select any function other than DVD in
step 5, karaoke and key control settings are canceled.
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
DVD function and not playing a disc.
• When high level sound signals are input, the system
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control function).
Summary of Contents for CMT-HPX11D
Page 67: ......