![background image](http://html.mh-extra.com/html/sony/cmt-g1bip/cmt-g1bip_service-manual_420351020.webp)
HCD-G1BiP/G1iP
18
2-13. BASE UNIT (BU-K6BD94D)
4
insulator
4
insulator
5
base unit
(BU-K6BD94D)
4
insulator
4
insulator
1
two floating screws
(PTPWHM2.6)
1
two floating screws
(PTPWHM2.6)
1
floating screw
(PTPWHM2.6)
3
loading (BK) assy
– CD mechanism bottom view –
2
two cone springs
Note: When you install the cone
spring, adjust sharp side to
the floating screw side.
2
two cone springs
Note: When you install the cone
spring, adjust sharp side to
the floating screw side.
2-14. OPTICAL PICK-UP BLOCK (KSM-213DCP)
Note 1:
When disconnection the wire (fl at type) (16 core) of OP base assy, solder the short-land.
2
Solder the short-land.
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (16 core).
1
Remove four solders.
3
wire (flat type) (16 core)
(OP base assy)
5
optical pick-up block
(KSM-213DCP)
4
BD94D board