![background image](http://html.mh-extra.com/html/sony/cmt-g1bip/cmt-g1bip_service-manual_420351014.webp)
HCD-G1BiP/G1iP
12
2-6. MAIN BOARD
Note 1:
Refer to page 13 for wire setting.
qf
two screws
(BVTP3
u
8)
qf
two screws
(BVTP3
u
8)
qf
screw
(BVTP3
u
8)
qg
two coating clips
qh
lug wire
qh
lug wire
qj
MAIN board
6
Cut the binding band (taiton).
Note 2: In reassembling, use new binding
band (taiton) to fasten the clamp
same as before.
1
flexible flat cable (21 core)
(CN401)
qs
flexible flat cable
(8 core) (CN401)
3
flexible flat cable (15 core)
(CN403)
5
connector
(CN702)
0
connector
(CN805)
qa
connector
(CN601)
7
connector
(CN701)
8
connector
(CN803)
4
flexible flat cable (17 core)
(CN404)
2
Lift up the coating clip.
9
Lift up the coating clip.
A
A
B
B
(G1BiP)
CN406
qd
flexible flat cable (9 core) (CN407)
Note
3: Both the flexible flat cable (9 core) can be
connected with the CN406 or CN407 on
MAIN
board.
When you connect the flexible
flat cable (9 core) with the CN407 on MAIN
board so as not to connect it by mistake.
Insert is straight to the interior.
Insert is incline
flexible flat
cable
flexible flat
cable
connector
connector
OK
NG
Note 4: When you install the flexible
flat cable, please install them
correctly.
There is a possibility that this
machine damages when not
correctly installing it.