![background image](http://html.mh-extra.com/html/sony/chc-p33d/chc-p33d_operating-instructions-manual_420253015.webp)
Chapter 4: the Tape Player
15
EN
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE II (CrO
2
)
tape.
SYSTEM
POWER
n
ON
=
+
6
4
DOLBY NR
1
2
5
p
1
Press
§
EJECT DECK B and insert a
blank tape into deck B with the side you
want to record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press TUNER/BAND several times until
the desired radio band appears.
3
Tune in the radio station you want to
record. (See “Listening to the Radio” or
“Playing Preset Radio Stations” for
details.)
4
Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
Press
r
REC.
Deck B stands by for recording.
6
Press
P
to release recording pause.
Recording starts.
To stop recording
Press
p
.
To reduce noise during MW/SW (AM)
recording
If a whistling noise is heard while
recording, reorient the AM loop aerial for
optimum reception.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that “DOLBY NR B” appears
in the display after step 4.
Recording From
Another Tape
(dubbing)
Dubbing Another Tape
Automatically
You can record the whole tape onto another
automatically by using high speed dubbing.
Use the buttons on the unit and TYPE I
(normal) or TYPE II (CrO
2
) tape for
dubbing.
SYSTEM
POWER
n
ON
=
+
4
2
1
1
3
p
1
Press
§
EJECT DECK A and DECK B
and insert a recorded tape in deck A
with the side you want to play facing
forward.
Also, insert a blank tape into deck B
with the side you want to record on
facing forward.
Recording and playback will start from
the front side of the tape, unless you
have changed the playing direction
before recording.
Make sure the tabs on the cassette for
deck B have not been removed.
2
Choose how you want the tape to be
recorded and press DIRECTION MODE.
3
Press HIGH SPEED DUBBING.
Deck B stands by for recording.
4
Press
P
.
The tape starts dubbing at high speed.
When the tape has started dubbing from
the reverse side in RELAY and
ß
mode, dubbing will stop at the end of
the reverse side.
To stop dubbing
Press
p
.
You do not have to press DOLBY NR for
high speed dubbing
The tape in deck B is automatically
recorded in the same state as the tape in
deck A.
To record
One side
Both sides*
Press DIRECTION
MODE to select
A
ß
or RELAY
Indicator
A
ß
RELAY
Operation
Dubbing stops at the end of
one side.
When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape position
in the other deck.
When the tape in one deck
reaches the end of its front
side, it stops until the other
tape come to its end, and then
both tapes reverse together.
continue to next page
➔