CDX-G1200U/G1201U/G1202U/G1280UM
8
When replacing the fuse,
be sure to use one
matching the amperage
rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again after
replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Fuse replacement
Fuse (10 A)
Installation
Before installing the unit, remove the
protection collar
ͨ
and the bracket
ʓ
from
the unit.
1
Pinch both edges of the protection
collar
ͨ
, then pull it out.
2
Insert both release keys
ͧ
until they
click, and pull down the bracket
ʓ
,
then pull up the unit to separate.
Note
Before installing this unit, remove the screw and
box on the back of the unit. Do not use the previous
parts you removed when installing the unit.
• Before installing, make sure the catches on
both sides of the bracket
ʓ
are bent
inwards 2 mm (
3
/
32
in).
• For Japanese cars, see “Mounting the unit
in a Japanese car” (page 25).
1
Position the bracket
ʓ
inside the
dashboard, then bend the claws
outward for a tight fit.
2
Mount the unit onto the bracket
ʓ
,
then attach the protection collar
ͨ
.
Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
ͨ
are properly engaged in the slots of the unit.
Removing the protection collar
and the bracket
ͨ
ʓ
ͧ
Face the hook inwards.
Screw
Box
Mounting the unit in the
dashboard
ʓ
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Catch
ʓ
ͨ
.
Mounting the unit in a Japanese car
You may not be able to install this unit in
some makes of Japanese cars. In such a
case, consult your Sony dealer.
TOYOTA
NISSAN
Note
To prevent malfunction, install only with the
supplied screws
ʖ
.
ʖ
to dashboard/center console
Existing parts supplied
with your car
ʖ
Bracket
Bracket
ʖ
to dashboard/center console
Existing parts supplied
with your car
ʖ
Bracket
Bracket
