Sony CDP-CE405 - 5 Disc Cd Changer, Operating Instructions Manual

Page: 13 / 32

Recording From CDs
13
EN
Recording From CDs
Recording From CDs
1
Press DISC SKIP to select the disc.
2
Press EDIT/TIME FADE repeatedly before you
start playing until “EDIT” appears and “A” in the
A
indication flashes in the display.
3
Press
≠
or
±
to specify the tape length.
Each time you press these buttons, the display
changes as shown below, with the tape length of
one side following each indication.
n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N
(23.00) (27.00) (30.00) (37.00) (45.00)
4
Press EDIT/TIME FADE to have the player create
the programme.
The display shows the tracks to be recorded. “B” in
the
B
indication flashes in the display.
5
When you record on both sides of the tape, press
EDIT/TIME FADE again.
The player inserts a pause, then creates the
programme for side B. The display shows the
programmed tracks.
When you record on one side of the tape, skip this
step.
6
Start recording on the deck and then press
·
on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
EDIT/TIME FADE
≠
/
±
DISC SKIP
·
Recording a CD by Specifying
Tape Length (Time Edit)
You can have the player create a programme that will
fit the length of the tape.
The player automatically creates a programme,
keeping the original order of the disc.
The programme can contain up to 32 tracks (a pause
inserted between tracks is counted as one track).
Note that tracks numbered over 20 cannot be
programmed automatically.
7
When you record on side B, reverse the tape and
press
·
or
P
on the player to resume playing.
To cancel Time Edit
Press CONTINUE.
You can programme the tracks you want in advance
Select the tracks before doing the above procedure. The
player creates a programme from the remaining tracks.
You can freely specify the tape length
Set the tape length using number buttons. To enter “0,”
use button 10.
Example: When the tape length of one side is 30 minutes
and 15 seconds
Press 3, 10, 1 and 5.
You can check and change the programme
See page 12.
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
EDIT/TIME FADE
≠
/
± ·
FADER
Press FADER
During pause. FADE lights up in
the display and the
Q
indication
flashes. The play fades in.
When you want to start fading out.
FADE
lights up in the display and
the
q
indication flashes. The play
fades out and the player pauses.
To
Start play fading in
End play fading out
Note
Fading lasts for about 5 seconds. However, when you press
FADER during Music Scan (see page 10), the play fades out
for about 2 seconds.