21
DOWNLOADING THE DRIVE PROGRAM USING THE
DWN-ASPI.EXE PROGRAM
• Execute this program to rewrite the program of the drive of this
unit.
Preparations:
• IBM PC compatible personal computer and display:
Use a personal computer with an HDD
• OS:
MS-DOS or PC-DOS version 5.0 or later.
Windows 95 or Windows 98 (When using Windows, follow the
settings on Windows described later.)
• Floppy disk with the “DWN-ASP1.EXE” and “625_
XXX
.HEX”
software
(CDM-002:J-2501-176-A)
• Floppy disk with latest drive program (625_
XXX
.HEX) (Supplied
as necessary)
• SCSI board:
Use “Adaptec AVA-2904E” provided with this unit.
If not available, use an equivalent.
• ASPI manager setting:
For details, refer to “Installing ASPI manager” on page 5.
• SCSI cable:
Connection:
SCSI
LINE-OUT
DIGITAL-OUT
IN
OUT
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE
CHANGER
SCSI IN
SCSI cable (Accessory)
Connected to
SCSI connector
of the PC
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE
CHANGER
1
Set SCSI TERM to “ON”, and do not
connect other SCSI equipment as much
as possible.
2
Set MODE to “ON”.
ON: Normal mode. Control the changer
using the PC.
OFF: Manual mode. Control the changer
manually using buttons.
3
Setting of SCSI ID of the drive
Set a desired ID number except 7.
Each SCSI ID must be set exclusively.
Fig. Connection of equipment
Setting:
• DIP switch settings
