94
Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
Before operation
• Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
• Press the following buttons to make the indicators disappear so that they will not be
superimposed on the edited tape:
– DATA CODE on the Remote Commander
– SEARCH MODE on the Remote Commander
– DISPLAY
(
1
)
Insert a tape for recording into the VCR, and insert the recorded tape into your
camcorder.
(
2
)
Prepare the VCR for recording, then set the input selector to LINE.
Connect the A/V connecting cable to the AUDIO/VIDEO jack. Refer to the
operating instructions of your VCR.
(
3
)
Set the POWER switch to VCR/PLAYER.*
(
4
)
Play back the recorded tape on your camcorder.
(
5
)
Start recording on the VCR.
Refer to the operating instructions of your VCR.
— Editing —
Dubbing a tape
S VIDEO OUT
S VIDEO
AUDIO/
VIDEO
A/ V OUT
S VIDEO
VIDEO
AUDIO
IN
White
Red
Yellow
: Signal flow
A/V connecting cable
(supplied)
VCR
* Modes on the POWER switch vary depending on models (p. 16).