30
Your camcorder automatically focuses.
(
1
)
Remove the lens cap and attach the lens cap to the grip strap.
(
2
)
Install the power source and insert a cassette. See “Step 1” to “Step 3” for more
information (p. 18 to 29).
(
3
)
Set the POWER switch to CAMERA while pressing the small green button.
This sets your camcorder to the standby mode.
(
4
)
Open the LCD panel while pressing OPEN. The viewfinder automatically
turns off.
(
5
)
Press START/STOP. Your camcorder starts recording. The REC indicator
appears on the screen. The camera recording lamp located on the front of your
camcorder lights up. To stop recording, press START/STOP again.
The recording lamp lights up in the viewfinder when you record with the
viewfinder.
Notes
•The data code (date/time when recorded) are not displayed during recording.
However, they are recorded automatically onto the tape. To display the data code
(date/time), press DATA CODE on the Remote Commander during playback.
•Fasten the grip strap firmly.
•Do not touch the built-in microphone during recording.
— Recording – Basics —
Recording a picture
5
3
4
1
2
50min
REC 0:00:01
SP
C
AM
ER
A
M
EM
ORY
VC
R
O
F
F
(C
H
G
)
POWER
Camera
recording lamp
Microphone