44
Viewing and Setting the Viewfinder Display
Chapt
er
3
B
as
ic
A
djus
tment
s
and Se
tt
ing
s
3-7 Viewing and Setting
the Viewfinder Display
Besides the video image, the viewfinder can display text
and messages showing the camera settings and operation
status.
The same information can be displayed on a monitor
connected to the SDI OUT connector.
Switching the image displayed in the viewfinder
The image in the viewfinder can be set to the output on the
SDI OUT1 connector or SDI OUT2 connector using the
<VF/HD-Y Source> page in the VF/SDI menu. See
2 Selecting the Viewfinder Output Signal” (page 43)
The default setting is the image that is output on the SDI
OUT2 connector.
3-7-1 Viewing the Basic Status
Display
The following status information is displayed in the
viewfinder when you press the VF DISPLAY button.
The display status can be specified on the <Status> page in
the Display Info menu
.
a
System format
Displays the current signal format of the camera.
b
FPS
Displays the number of frames shot per second.
c
Shutter angle
Displays the shutter value as a shutter angle.
When using an electronic shutter, “E” is displayed before
the angle. When using a mechanical rotary shutter, “R” is
displayed.
d
ND filter
Displays the type of ND filter currently selected.
e
Sensitivity
Displays the currently set sensitivity as an EI value.
f
Color temperature
Indicates the state of the color temperature.
g
SDI1 look
Displays the SDI1 look settings for the output image on the
SDI OUT1 connector.
h
SDI2 look
Displays the SDI2 look settings for the output image on the
SDI OUT2 connector and in the viewfinder.
i
Highlight clip indicator
Displays the highlight clip indicator status (On/Off).
Displayed only for the output image on the SDI OUT2
connector and in the viewfinder.
1)
1) The signal output in the viewfinder is active only when SDI OUT2 is
selected as the signal source.
j
Lens
Displays the focus, iris, and zoom positions of the attached
lens.
k
Recording status indicator
Displays “
z
” when the SR-R4 docked on the camera is
recording.
l
Time code
Displays the time code.
m
Media remaining
Displays the approximate number of minutes remaining
for the recording media in the SR-R4 docked on the
camera.
n
File name
Displays the file name.
o
Power supply voltages
Displays the state of the output voltages. The output from
DC 24 V OUT is displayed on the left, and DC 12 V OUT
on the right.
The voltage readout begins to flash if the corresponding
input voltage falls to the Near End value specified on the
<Battery Alarm> page in the Config menu. The indicator
flashes more rapidly if the voltage falls to the End value.
p
Message area
Displays a warning/error message if an error occurs. The
error details are also displayed in the self diagnostics field
in settings page 3 on the subdisplay.
For details about messages, see “Warning/Error
Messages” (page 74).
1
3
2
4
5
6
7
8
9
qg
qs
0
qd
qf
qh
qa
