manualshive.com logo in svg

Sony CBK-65EL, Operation Manual

Share
Download
Sony CBK-65EL Operation Manual Download Page 19

19

  Cha

p

te

r 2  

 I

n

s

ta

llat
ion an

d Prep

ar

at

ions

Chapter

Mounting the SR-R4

2

Installation and 
Preparations

2-1 Mounting the SR-R4

The SR-R4 docks on the rear of the camera head.

For details about mounting the SR-R4, refer to the 
Operation Manual of the SR-R4.

• SR-R4/SRK-CP1 software V4.00 or later is required.
• Always turn off the camera power supply when 

mounting the SR-R4. 

• The recorder connector for connecting the SR-R4 is an 

optical connector. Attach the connector cap on the 
optical connector when not connected to an SR-R4 to 
protect the connector. After removing the cap, store it in 
the position shown in the following figure for 
safekeeping. 

• When mounting the SR-R4, fix the camera head on a 

tripod in advance to keep the camera head stable.

For tripod mounting, see “2-6 Mounting the Camera on 
a Tripod” (page 24).

• When the camera is used with the SR-R4 docked, make 

sure that the camera is securely fixed and stable so that it 
will not fall over. 

Notes

SR-R4

Summary of Contents for CBK-65EL


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands