Sony BrightEra VPL-SW526M Operating Instructions Manual Download Page 69

Page: 69 / 70

Index

Ot
h

Presentation .....................................40

Remote commander ...................................6
Remote control detector ............................4
Replacing the lamp ..................................52
RS-232C ....................................................5

The Connection/Power Menu ..................28
The Function menu ..................................26
The Screen menu .....................................22
Troubleshooting .......................................50
Turn off ................................................6, 19
Turn on ................................................6, 14

USB Display ............................................43
USB Media Viewer .................................44
Using a menu ...........................................20
Using the e-mail report Function ............34

Ventilation holes ........................................4
Volume ......................................................7

With No Input ..........................................28
With Static Signal ....................................28

About Trademarks

• Adobe and Adobe Acrobat are trademarks

or registered trademarks of Adobe
Systems Incorporated in the United States
and/or other countries.

• Kensington is a registered trademark of

Kensington Technology Group.

• The terms HDMI and HDMI High-

Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.

• Internet Explore is registered trademarks

of Microsoft Corporation in the United
States and/or other countries.

• PJLink is a registered trademark of Japan

Business Machine and Information
System Industries Association.

• AMX is a trademark of AMX Corporation.
• Crestron RoomView is a trademark of

Crestron Corporation.

• All other trademarks and registered

trademarks are trademarks or registered
trademarks of their respective holders. In
this manual,

™

and

marks are not

specified.

Summary of Contents for BrightEra VPL-SW526M







































































Search results

Summary of Contents for BrightEra VPL-SW526M

Reviews:

Related manuals for BrightEra VPL-SW526M

Brands by name

Popular brands

Sony BrightEra VPL-SW526M, Operating Instructions Manual

Search results

Summary of Contents for BrightEra VPL-SW526M

Reviews:

Related manuals for BrightEra VPL-SW526M

Brands by name

Popular brands