Sony BrightEra VPL-SW526M Operating Instructions Manual Download | Manualshive

Page: 48 / 70

background image

48

Indicators

B

Others

Indicators

The indicators allow checking the status and notify you of abnormal operation of the projector.
If the projector exhibits abnormal status, address the problem in accordance with the table
below.

ON/STANDBY indicator

LAMP/COVER indicator

Status

Meaning/Remedies

Lights in red

The projector is in Standby mode.

Flashes in green

• The projector is ready to operate after having been turned on.
• The lamp cools after the projector is turned off.

Lights in green

The projector’s power is on.

Lights in orange

The projector is in With No Input (Lamp Cutoff). (page 28)

Flashes in red

The projector is in abnormal status. Symptoms are indicated by
number of flashes. Address the problem in accordance with the
following. If the symptom is shown again, consult with qualified Sony
personnel.

Flashes twice

The internal temperature is unusually high. Check the items below.
• Check if nothing is blocking the ventilation holes. (pages 4, 4)
• Check if the air filter is not clogged. (page 54)
• Check if the Installation Attitude in the Installation menu is set

correctly. (page 30)

Flashes six times

Unplug the AC power cord from a wall outlet. After checking that the
ON/STANDBY indicator goes out, plug the power cord to a wall
outlet again then turn on the projector.

Other number of
flashes

Consult with qualified Sony personnel.

Status

Meaning/Remedies

Flashes in red

Symptoms are indicated by number of flashes. Address the problem in
accordance with the following.

Flashes twice

The lamp cover or the air filter cover is not attached securely.
(pages 52, 54)

Flashes three times The temperature of lamp is unusually high. Turn off the power and

wait for lamp to cool then turn on the power again. If the symptom is
shown again, the lamp may be burnt out. In this case, replace the lamp
with a new one (page 52).

«
...
46
47
48
49
50
...
»

Summary of Contents for BrightEra VPL-SW526M







































































Reviews:

No comments

Related manuals for BrightEra VPL-SW526M

Brand: Inovel Pages: 9

Brand: D-ILA Pages: 8

Brand: Black Box Pages: 1

Brand: BenQ Pages: 2

Brilliant LC-SB15

Brand: Eiki Pages: 1

Brand: CHIEF Pages: 24

Grand Cinema HT C3X-LINK

Brand: Sim2 Pages: 37

Brand: Plus Pages: 2

Brand: Kodak Pages: 24

Brand: Epson Pages: 4

Brand: Epson Pages: 8

Accolade Wireless Audio Set

Brand: Epson Pages: 32

3LCD - PowerLite S4 Projector

Brand: Epson Pages: 8

EpiqVision Ultra LS500

Brand: Epson Pages: 2

Brand: Epson Pages: 36

Brand: Epson Pages: 117

3LCD - PowerLite S4 Projector

Brand: Epson Pages: 2

Brand: Dukane Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands