Sony BrightEra VPL-SW526M Operating Instructions Manual Download Page 22

Page: 22 / 70

The Screen Menu

The Screen Menu

The Screen menu is used to adjust the size, position and aspect ratio of the projected image for
each input signal.

Items

Item descriptions

Aspect

Changes the aspect ratio of the projected image (page 24).

VPL-SW536C/
SW526C/SW536/
SW526: When the
computer signal is
input

4:3:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 4:3.

16:9:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 16:9.

Full 1:

Displays the image to fit the maximum projected image

size without changing the aspect ratio of the input signal.

Full 2:

Displays the image to fit the maximum projected image

size changing the aspect ratio of the input signal.

Full 3:

Displays the image to fit the maximum width or height, up

to 1280 × 720 pixels, without changing the aspect ratio of the
input signal.

Normal:

Displays the image on the center position of the

projected screen without changing the resolution of the input
signal or enlarging the image.

VPL-SW536C/
SW526C/SW536/
SW526: When the
video signal is input

4:3:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 4:3.

16:9:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 16:9.

Full:

Displays the image to fit the maximum projected image size

changing the aspect ratio of the input signal.

Zoom:

Zooms the center area of a projected image.

VPL-SX536: When
the computer signal is
input

4:3:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 4:3.

16:9:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 16:9.

Full 1:

Displays the image to fit the maximum projected image

size without changing the aspect ratio of the input signal.

Normal:

Displays the image on the center position of the

projected screen without changing the resolution of the input
signal or enlarging the image.

VPL-SX536: When
the video signal is
input

4:3:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 4:3.

16:9:

Displays the image to fit the maximum projected image size

with an aspect ratio fixed to 16:9.

Zoom:

Zooms the center area of a projected image.

Summary of Contents for BrightEra VPL-SW526M







































































Search results

Summary of Contents for BrightEra VPL-SW526M

Reviews:

Related manuals for BrightEra VPL-SW526M

Brands by name

Popular brands

Sony BrightEra VPL-SW526M, Operating Instructions Manual

Search results

Summary of Contents for BrightEra VPL-SW526M

Reviews:

Related manuals for BrightEra VPL-SW526M

Brands by name

Popular brands