manualshive.com logo in svg

Sony BRC-X400, Operating Instructions Manual, Page: 41 / 104

Share
Download
Sony BRC-X400 Operating Instructions Manual Download Page 41

41

FOCUS Menu (SRG-X120/
HD1M2)

The FOCUS menu is used to select the focus 
mode.
You can set the menu from the Administrator 
menu on a web browser.
For details, see “PTZF control tab” (page 88).

MODE (Focus - Focus mode)

Select the focus mode.

[AUTO]:

 The camera focuses automatically.

[MANUAL]:

 You can focus manually. Adjust 

using the supplied remote commander or 
optional remote controller.

Notes

Select [MANUAL] and adjust the focus manually 
when shooting the following objects.
• White walls and other objects without contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or 

reflected

• Nightscapes and other dark objects with 

blinking lights

• Lit objects shot with darkened exposure 

adjustment or exposure compensation 
settings

PICTURE/OPTICAL FILTER 
Menu

The PICTURE/OPTICAL FILTER menu is used to 
adjust picture quality improvement features and 
optical filters.
You can set the menu from the Administrator 
menu on a web browser.
For details, see “Picture tab” (page 69).

PICTURE

HIGH RESOLUTION (Picture - High 
resolution mode)

You can set [HIGH RESOLUTION] (High resolution 
mode) to [ON] or [OFF]. When set to [ON], you 
can enjoy emphasized edge and high-resolution 
images.

Notes

• When set to [ON], image noise may increase 

more than when set to [OFF].

• When [MODE] is set to [MANUAL] in [DETAIL], 

the function is not available.

NOISE REDUCTION (Picture - NR mode)

You can obtain clearer images by removing 
unnecessary noise (fixed pattern and 
randomized noise) with [NOISE REDUCTION]. 
Choose from [OFF] or level 1 through level 5. 
When you select [ADVANCED], you can set up [2D 
NR LEVEL] and [3D NR LEVEL] independently.

2D NR LEVEL (Picture - 2D NR level)

This is enabled when [NOISE REDUCTION] is 
[ADVANCED]. Choose from [OFF] or level [1] 
through level [5] for noise reduction.

3D NR LEVEL (Picture - 3D NR level)

This is enabled when [NOISE REDUCTION] is 
[ADVANCED]. Choose from [OFF] or level [1] 
through level [5] for noise reduction.

Summary of Contents for BRC-X400









































































































Reviews:

No comments