Sony BRC-X400, Operating Instructions Manual, Page: 48 / 104

48
Recording pan/tilt and zoom
operations
1
Select the trace number you want to record
in TRACE NO.
2
Move the cursor to RECORD, and press the
HOME button.
*SETTING (ENTER TO START REC)* is
displayed at the bottom of the screen.
3
Move to the record start position, and press
the HOME button.
*RECORDING (ENTER TO STOP)* is displayed
at the bottom of the screen.
4
Perform the pan/tilt and zoom operations
you want to record.
During recording, the ELAPSED TIME (SEC)
number at the bottom of the screen
increases in increments of 1.
During recording, the menu screen display
continues.
Note
If using the remote commander, pan/tilt and
zoom operations cannot be performed
simultaneously.
5
Press the HOME button to stop recording.
The recorded trace number is displayed
under RECORDED TRACE NO.
Note
The recording automatically stops after the
maximum recording time has elapsed.
Playing pan/tilt and zoom
operations
1
Select the recorded trace number you want
to play in TRACE NO.
The recorded traces numbers are displayed
under RECORDED TRACE NO.
2
Move the cursor to PLAY, and press the
HOME button.
*READY FOR PLAY (ENTER)* is displayed at
the bottom of the screen, and the camera
moves position to the recorded pan/tilt/
zoom start position.
3
Press the HOME button to begin playback.
The recorded pan/tilt/zoom operations are
played back, and the ELAPSED TIME (SEC)
number increases in increments of 1.
During playback, the menu screen display
continues, with *PLAYING* displayed at the
bottom of the screen.
Note
Playback stops if a pan, tilt, or zoom operation is
performed during playback using the remote
commander or a remote controller.
Deleting recorded pan/tilt and
zoom operations
1
Select the trace number you want to delete
in TRACE NO.
2
Move the cursor to DELETE, and press the
HOME button.
The recording is deleted, and the
corresponding trace number is removed
from RECORDED TRACE NO.