Sony BRC-X400, Operating Instructions Manual, Page: 39 / 104

39
less contrast in darker regions and more
contrast in lighter regions.
[ITU709]: Gamma curve equivalent to ITU-709.
PATTERN (Gamma - Pattern)
Choose a value from [0] to [51]. This can be
chosen when [SELECT] is set to [PATTERN].
PATTERN FINE
Choose a value from [0] to [9]. When [PATTERN]
is [0], [0] cannot be chosen for [PATTERN FINE].
When [PATTERN] is [51], a value larger than [3]
cannot be chosen for [PATTERN FINE]. This can be
chosen when [SELECT] is set to [PATTERN].
OFFSET (Gamma - Offset)
You can adjust the offset of the output level of
gamma curves.
Choose a value from [–64] to [0] to [+64].
LEVEL (Gamma - Level)
You can adjust the correction level of the gamma
curve. Choose a value from [–7] to [0] to [+7].
BLACK GAMMA (Gamma - Black gamma
level)
You can adjust the black gamma level to recreate
gradation in the dark areas of the picture or to
suppress noise with black-out. Choose a value
from [–7] to [0] to [+7].
BLACK GAMMA RANGE (Gamma - Black
gamma range)
You can adjust the brightness range for which
the black gamma becomes effective. Choose
from [LOW], [MIDDLE], and [HIGH]. The range
becomes small when [LOW] is chosen, and it
becomes large when [HIGH] is chosen.
BLACK LEVEL (Gamma - Black level)
You can adjust the master black level. Choose a
value from [–48] to [0] to [+48].
VISIBILITY ENHANCER
SETTING (Exposure - Visibility Enhancer)
When this is turned [ON], gradation correction is
adaptively performed according to the scene
being shot.
EFFECT (Exposure - Effect)
You can adjust the brightness of the shadows on
the screen. Choose a value from [–3] to [0] to [+3].
VISIBILITY ENHANCER Menu
(SRG-X400/X402/201M2/
X120/HD1M2)
You can set the menu from the Administrator
menu on a web browser.
For details, see “Picture tab” (page 69).
SETTING (Exposure - Visibility Enhancer)
When this is turned [ON], gradation correction is
adaptively performed according to the scene
being shot.
EFFECT (Exposure - Effect)
You can adjust the brightness of the shadows on
the screen. Choose a value from [–3] to [0] to [+3].