47
GB
Add
ition
al In
forma
tion
Additional Information
Specifications
Media receiver
Model name
MBT-W1
System
TV system
Analogue: Depending on your country selection: B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Colour/video system
Analogue: PAL, SECAM NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC [email protected], [email protected]
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Input/Output jacks
Aerial
75 ohm external terminal for VHF/UHF
/
AV1
21-pin Scart connector (CENELEC standard) including audio/video input, RGB input and unit
audio/video output.
AV2
Video input (phono jack)
AV2
Audio input (phono jacks)
DIGITAL AUDIO OUT (OPTICAL)(digital optical jack)
COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
COMPONENT IN
Audio input (phono jacks)
500 mVrms
HDMI IN 1, 2, 3
Video: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
PC Input (see page 49)
PC IN
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green
B: 0.7 Vp-p, 75 ohms, non Sync on Green
R: 0.7 Vp-p, 75 ohms, non Sync on Green
HD: 1-5 Vp-p
VD: 1-5 Vp-p
PC audio input (minijack)
IR BLASTER
3.5 mm minijack
CAM (Conditional Access Module) slot
i
Headphones jack
USB port
Power and others
Power requirements
Mains adaptor: 100-240 V AC, 50/60 Hz
Media receiver: DC18 V
Power consumption
20 W
Standby power consumption*
3.5 W or less (19 W when Quick Start is ON)
Dimensions
(Approx.)
(w × h × d)
for vertical
placement with
stand
13.1 × 30.2 × 28.6 cm
for horizontal
placement
28.0 × 7.2 × 28.6 cm
Mass (Approx.) for vertical
placement with
stand
2.5 kg
for horizontal
placement
2.4 kg
(Continued)
