5
GB
Start-up G
u
ide
3
Attach the monitor to the Table-Top Stand
using the screws (supplied with SS-
TBL700). Attach the two bottom screws
first, then the top two screws.
~
• If an electric screwdriver is used, set the
torque to tighten at approximately 1.5 N·m
{15 kgf·cm}.
• Do not put stress on the LCD panel or the
frame around the screen.
• Hold the Table-Top Stand firmly with both
hands.
4
Connect the mains lead (supplied) to the
AC IN socket.
~
• Insert the plug fully into the socket.
• When using with an HDMI equipment, also
connect the HDMI cable to the HDMI IN
socket (page 27).
F
mark
Top part
Top screws
Bottom screws
(Continued)
