- 12 -
2-6. Stand Assy Removal
2-5. Rear Cover Installation (52 inches)
To install the ‘Rear Cover’ push the clamper point as shown
in the photo on the back surface of the ‘Rear Cover’ then
replace all screws.
Remove the 4 stand fixing screws indicated and lift the TV
set up and away from the ‘Stand Assy’.
Screw Part number(s) and Description(s)
2-580-608-01 SCREW, +PSW M5X16
=>=>
=>
=>
Clamper Here
Push This
Point
2-8. Stay Top Installation
2-7. Stay Top Removal
To remove the ‘Stay Top’ place a flat blade screwdriver as
shown by 1 in the photo above, then lift the clamper slightly
as shown by 2 and finally slide the clamper as shown by 3.
When reusing the ‘Stay Top’ please use with the removed
set.
1
2
3
1
2
To install the ‘Stay Top’ slide into place as shown by 1 in the
photo above, then push the clamper as shown by 2, making
sure that the embossing on the clamper is locked in the hole
of the panel.
