Sony BRAVIA KDL-32R420A Page 10 Operating Instructions Manual Download

Page: 10 / 48

Safety
Information

Installation/Set-up

Install and use the TV set in
accordance with the instructions
below in order to avoid any risk of fire,
electrical shock or damage and/or
injuries.

Installation

• The TV set should be installed near

an easily accessible mains socket.

• Place the TV set on a stable, level

surface.

• Only qualified service personnel

should carry out wall installations.

• For safety reasons, it is strongly

recommended that you use Sony
accessories.

• Be sure to use the screws supplied

with the Wall-mount bracket when
attaching the mounting hooks to the
TV set. The supplied screws are
designed as indicated by illustration
when measured from the attaching
surface of the mounting hook. The
diameter and length of the screws
differ depending on the Wall-mount
bracket model. Use of screws other
than those supplied may result in
internal damage to the TV set or
cause it to fall, etc.

Transporting

• Before transporting the TV set,

disconnect all cables.

• Two or three people are needed to

transport a large TV set.

• When transporting the TV set by

hand, hold it as shown in the
illustration. Do not put stress on the
LCD panel and the frame around the
screen.

• When lifting or moving the TV set,

hold it firmly from the bottom.

• When transporting the TV set, do not

subject it to jolts or excessive
vibration.

• When transporting the TV set for

repairs or when moving, pack it
using the original carton and
packing material.

Ventilation

• Never cover the ventilation holes or

insert anything in the cabinet.

• Leave space around the TV set as

shown below.

• It is strongly recommended that you

use a Sony wall-mount bracket in
order to provide adequate air-
circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and

prevent the collection of dirt or dust:
–

Do not lay the TV set flat, install
upside down, backwards, or
sideways.

–

Do not place the TV set on a
shelf, rug, bed or in a closet.

–

Do not cover the TV set with a
cloth, such as curtains, or items
such as newspapers, etc.

–

Do not install the TV set as shown
below.

Mains lead

Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or
injuries:

–

Use only mains leads supplied by
Sony, not other suppliers.

–

Insert the plug fully into the mains
socket.

–

Operate the TV set on a 220–240 V
AC supply only.

–

When wiring cables, be sure to
unplug the mains lead for your
safety and take care not to catch
your feet on the cables.

–

Disconnect the mains lead from
the mains socket before working
on or moving the TV set.

–

Keep the mains lead away from
heat sources.

–

Unplug the mains plug and clean it
regularly. If the plug is covered
with dust and it picks up moisture,
its insulation may deteriorate,
which could result in a fire.

Notes

• Do not use the supplied mains lead

on any other equipment.

• Do not pinch, bend, or twist the

mains lead excessively. The core
conductors may be exposed or
broken.

• Do not modify the mains lead.
• Do not put anything heavy on the

mains lead.

• Do not pull on the mains lead itself

when disconnecting the mains lead.

• Do not connect too many appliances

to the same mains socket.

• Do not use a poor fitting mains

socket.

Prohibited Usage

Do not install/use the TV set in
locations, environments or situations
such as those listed below, or the TV
set may malfunction and cause a fire,
electrical shock, damage and/or
injuries.

Location:

• Outdoors (in direct sunlight), at the

seashore, on a ship or other vessel,
inside a vehicle, in medical
institutions, unstable locations, near
water, rain, moisture or smoke.

• If the TV is placed in the changing

room of a public bath or hot spring,
the TV may be damaged by airborne
sulfur, etc.

Mounting Hook

Hook attachment on rear
of TV set

Screw
32, 40 TV: M4
46 TV: M6

32, 40 TV: 6.5mm ~ 10mm
46 TV: 8mm ~ 12mm

KDL-32R424A/32R423A/32R421A/
32R420A

KDL-46R473A/46R470A/40R474A/
40R473A/40R471A/40R470A

Be sure to hold the bottom of
the panel, not the front part.