33
GB
Usi
ng the
Me
nu
Audio Filter
Improves the sound for individual channels in the case of distortion
in mono broadcasts. Sometimes a non-standard broadcast signal
can cause sound distortion or intermittent sound muting when
watching mono programmes.
1
Press
M
/
m
to select “Low” or “High”, then press OK.
If you do not experience any sound distortion, we recommend
that you leave this option set to the factory setting “Off”.
2
Press OK to select “Confirm”, then press OK.
Note
You cannot receive stereo or dual sound when “Low” or “High” is
selected.
Skip
Skips unused analogue channels when you press PROG +/- to
select channels. (You can still select a skipped channel using the
number buttons.)
1
Press
M
/
m
to select “Yes”, then press OK.
2
Press OK to select “Confirm”, then press OK.
To restore a skipped channel, select “No” in step 1.
Decoder
Records the scrambled channel selected when using a decoder
connected to the scart connector
/
2 either directly or via a
VCR.
Note
Depending on the country/region selected for “Country” (page 29), this
option may not be available.
1
Press
M
/
m
to select “On”, then press OK.
2
Press OK to select “Confirm”, then press OK.
To cancel this function afterwards, select “Off” in step 1.
ATT
Attenuates the RF signal. In case of a strong RF signal, some video
interference may be displayed.
1
Press
m
/
M
to select “On”, then press OK.
2
Press OK to select “Confirm”, then press OK.
Tip
This option cannot be used if “AV2 Output” is set to “D-TV” (page 26)
Option
Description
Continued
