54
SKC-IP45AF (Option)
SKC-4001 (Option)
Design and specifications are subject to change without
notice.
Open Source Software Licenses
On the basis of license contracts between Sony and the
software copyright holders, this product uses open software.
To meet the requirements of the software copyright holders,
Sony is obligated to inform you of the content of these
licenses.
For the content of these licenses, see “License1.pdf” in the
“License” folder of the supplied CD-ROM.
Adobe Reader must be installed on your computer to view
PDF files.
If Adobe Reader is not installed on your computer, you can
download it by accessing the following URL.
http://get.adobe.com/reader
General
Power consumption
39.6 W
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions
(w / h / d, excluding
protrusions)
NET board: Approx. 224 × 11 × 225 mm
(8
7
/
8
×
7
/
16
×8
7
/
8
inches)
CN board: Approx. 55 × 21 × 136 mm
(2
1
/
4
×
27
/
32
× 5
3
/
8
inches)
Mass
NET board: Approx. 0.35 kg (12.3 oz.) (1)
CN board: Approx. 0.10 kg (3.5 oz.) per
board (3)
Output connectors
CN board:
NMI-LAN (SLOT1)
NMI-LAN (SLOT2)
NMI-LAN (SLOT3/4)
SFP+ (6)
10G BASE-** (using SFP+ transceiver
module)
Supplied accessories
30-pin cable (1)
Harness (6)
Screws (M3×8) (3)
NMI label (1)
Operating Instructions (1)
Related equipment
OTM-10GSR1 SFP+ Transceiver Module
General
Power consumption
110 W
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (w / h / d,
excluding protrusions)
329 × 50 × 352 mm (13 × 2 × 13
7
/
8
inches)
Mass
Approx. 1.5 kg (3 lb 4.9 oz)
I/O connectors
Connectors
SFP28
Number of lines
2
Signal type
25GBASE-** (depending on SFP28
transceiver module)
For information about the supported SFP28
transceiver modules (e.g. OTM-25GSR1),
contact your Sony sales or service
representative.
Supplied accessories
Flat cable
30-pin (1)
Coaxial cable
10-pin (1)
30-pin (1)
40-pin (1)
Screw
M3×8 (21)
M2.6×5 (5)
Frame
IF frame (1)
C frame (1)
Fan
Front fan assembly (1)
Front fan (Right) assembly (1)
Rear fan assembly (1)
Sheet
Duct sheet (1)
Rear partition sheet (1)
Wire saddle (3)
Edge saddle (2)
Cord clamp (1)
SFP cover (4)
Operating Instructions (1)
Related equipment
OTM-25GSR1 SFP28 transceiver module
Notes
• Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND
MADE BY USERS OF THIS UNIT OR MADE BY THIRD
PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION
OR DISCONTINUATION OF ANY SERVICES RELATED
TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND RESULTING FROM A FAILURE TO IMPLEMENT
PROPER SECURITY MEASURES ON TRANSMISSION
DEVICES, UNAVOIDABLE DATA LEAKS RESULTING
FROM TRANSMISSION SPECIFICATIONS, OR SECURITY
PROBLEMS OF ANY KIND.
Depending on the operating environment, unauthorized third
parties on the network may be able to access the unit. When
connecting the unit to the network, be sure to confirm that the
network is protected securely.
