18
HFR Video System
The BPU4500A can transfer HFR video and perform signal
processing for the following formats according to the
connected camera.
Optional SZC-4002/4002M/4002W HFR Software must be
installed to support formats other than 2× and 3× HD.
Yes: Supported, No: Not supported
1) Interlaced output also supported in HD HFR 1080 format
2) Selectable only when the format is set to 720P by the camera control unit (such as the HDCU2000).
A 1× frame rate signal can be output at the same time from
SLOT3, SLOT4, and the CCU.
• The HFR imaging function is dependent on the software
version of the connected camera and camera adaptor.
Check the compatibility of each device before use.
• When HD HFR is selected, the HFR video is output as an
SDI signal only. IP is not output.
CA4000
Prompter output
connector settings
MAINTENANCE/<SDI-OUT>
SDI-MONI OUT
HD-PROMPT
MAINTENANCE/<PROMPTER2 OUT>
OUTPUT
PROMPTER2
Device
Setting
Menu/Page
Item
Set value
HFR format
Connected device
Without option
SZC-4002 series installed
HDC4300, HDC-P43
PMW-F55
F65
HDC4300, HDC-P43
1080/59.94P (2×)
1)
Yes
No
No
No
1080/50P (2×)
1)
Yes
No
No
No
720/59.94P (2×)
2)
Yes
No
No
No
720/50P (2×)
2)
Yes
No
No
No
1080/59.94P (3×)
1)
Yes
No
No
No
1080/50P (3×)
1)
Yes
No
No
No
720/59.94P (3×)
2)
Yes
No
No
No
720/50P (3×)
2)
Yes
No
No
No
1080/59.94P (4×)
1)
No
Yes
No
Yes
1080/50P (4×)
1)
No
Yes
No
Yes
720/59.94P (4×)
2)
No
Yes
No
Yes
720/50P (4×)
2)
No
Yes
No
Yes
1080/59.94P (6×)
1)
No
Yes
No
Yes
1080/50P (6×)
1)
No
Yes
No
Yes
720/59.94P (6×)
2)
No
Yes
No
Yes
720/50P (6×)
2)
No
Yes
No
Yes
1080/59.94P (8×)
1)
No
No
No
Yes
1080/50P (8×)
1)
No
No
No
Yes
720/59.94P (8×)
2)
No
No
No
Yes
720/50P (8×)
2)
No
No
No
Yes
4096×2160/59.94P (2×)
No
No
Yes
Yes
4096×2160/50P (2×)
No
No
Yes
Yes
Notes