21
US
Ta
bl
O
Se
ttin
g
Inde
Charging the camera
The camera’s battery is continuously recharged whenever the camera is connected to a running
computer.
1
Press the ON/OFF (Power) button to turn off
the camera.
2
Push the “PUSH” part at the bottom of the
camera.
The built-in USB arm comes out as shown in the
illustration.
3
Connect the camera to the computer that is
turned on.
The charge lamp lights up in orange, and charging starts.
When the charge lamp turns off, charging is finished.
• The charge lamp may turn off when the temperature is outside
of the recommended operating temperature (10°C to 30°C
(50°F to 86°F)).
• The charge icon is displayed on the LCD screen when charging
is started. However, the icon disappears after a while.
• If the battery level is low (low battery), the charge icon may not
be displayed on the LCD screen. In this case, check if the
charge lamp is lighting up.
4
When charging is finished, delete the USB connection between the
camera and computer.
ON/OFF (Power)
button
Built-in USB arm
PUSH
Charge
lamp
Continued
r