[NEW CID FONT]
3-206-292-02(1)
BKMW-105
5
1
DMC EDIT/FEED button
To carry out recording of playback at any speed
between –1 and +3 times normal (between –1 and +2
times normal for Betacam SX), automatic playback,
and automatic editing.
For playback in feed mode, hold down this button and
press the PLAY button.
Playback in feed mode requires a setting of extended
menu item 111.
MSW-M2000/M2000P: Extended menu item
111 (page 9-8)
MSW-M2100/M2100P: Extended menu item
111 (page 8-8)
Change the item name to “TSO/FEED PLAY” and add
setting item “FEED”.
FEED:
Enable feed play mode.
Additional functions
Carrying out playback in feed mode
Use the following procedure to carry out feed mode
playback. (The figure is the MSW-M2000/M2000P.)
1
Hold down the DMC EDIT/FEED button, and turn
the search dial to set the playback speed.
During MPEG IMX playback, you can set single
or double speed.
2
Hold down the DMC EDIT/FEED button, and
press the PLAY button.
Both buttons light, and playback in feed mode
starts.
3
Where you wish to stop playback, press the STOP
button.
Playback stops.
Auto feed playback
Auto feed playback is a function for feed mode
playback of the segment between a specified IN point
and OUT point.
By connecting this unit to a recorder VTR with a
RECEIVE STANDBY function (MAV-555/2000 etc.)
via the SDTI-CONTROL PANEL interface and
executing auto feed playback on this unit, you can
record the interval between the IN and OUT points on
the recorder.
1
On the HOME page of the function menu, set F4
(CTL/TC) to TC.
2
Start playback and, with the ENTRY button held
down, press the IN button (MSW-M2000/
M2000P) or the STUNT IN button (MSW-M2100/
M2100P) at the point where you want to set the IN
point. To set the OUT point, press the OUT button
(MSW-M2000/M2000P) or the STUNT OUT
button (MSW-M2100/M2100P) with the ENTRY
button held down.
3
With the DMC EDIT/FEED button held down,
press PREVIEW button (MSW-M2000/M2000P)
or the LEARN button (MSW-M2100/M2100P).
(Before starting, refer to step
1
of the previous
section “Carrying out playback in feed mode” and
set the feed mode playback speed.)
The VTR prerolls to a point 5 seconds before the
IN point (this can be changed with item 001 of the
basic menu) and starts auto feed playback.
Playback stops after postroll for 2 seconds beyond
the OUT point.
The segment between the IN and OUT points is
recorded on the recorder.
Z
2
3 1
Speed display area
GB+JALL-SY.p65
01.10.19, 0:09 PM
Page 5
Adobe PageMaker 6.5J/PPC
