Sony ARS-S1, Help Manual

Page: 97 / 123

Flight screen (“Airpeak Flight” App)
The items on the flight screen used for flight operations are shown below.
C1 (Custom 1)/C2 (Custom 2)/C3 (Custom 3)/C4 (Custom 4) buttons
Assign the functions for operating the aircraft, camera, and gimbal to these buttons in the setting menu of the
“Airpeak Flight” App.
5.
(Back)
Tap to go back to the App Home page.
1.
Telemetry
(Flight mode indication): Indicates the current position of the flight mode switch on the remote controller and
the current flight mode.
(Horizontal information indication): Indicates the horizontal speed of the aircraft and the distance from the
take-off position.
(Vertical information indication): Indicates the vertical speed of the aircraft and the altitude relative to the
take-off position. The Vision Positioning altitude is also displayed when the Vision Positioning function is enabled.
2.
Radio reception information
(Indication of the number and signal strength of positioning satellites such as GNSS (Global Navigation
Satellite System))
(Indication of the signal strength of the remote controller)
3.
Remaining battery level
(Indication of the remaining flight time and remaining battery of the aircraft): Indicates the remaining
flight time until forced landing due to insufficient battery power. The remaining battery level of the aircraft is
indicated as a numerical value and a bar. The red area shows the remaining amount set for [Aircraft]
－
[Batteries]
－
[Start forced landing [%]] in the setting menu, and the yellow area shows the remaining amount set
for [Battery-life alert [%]]. The triangle mark indicates the minimum battery level required to return to the Home
Point. When the battery level drops to the level indicated by the triangle mark, the aircraft starts to perform RTH
(Return to Home).
(Indication of the remaining battery of the camera)
(Indication of the remaining battery of the mobile device)
4.
(Settings)
Tap to display the setting menu. Tap (Close) to hide the menu.
5.
Side menu
6.
97