1
2
Notes on USB cable usage and battery charging
•
If there are two USB cables in the kit (a USB cable for charging and a USB cable for data
transfer),
the USB cable for charging is only intended for charging your phone. Do not
use it for transferring data.
The USB cable for the USB charger is only intended for
connection to the AC adapter to charge your phone.
It must not be used for connection
to a computer. It can only be used for charging your phone. Never use it for charging
accessories.
•
If there is only one USB cable in the kit, it is intended for charging your phone as well as
transferring data.
•
If there is only one USB cable for the USB charger in the phone kit, this USB cable is only
intended for charging your phone.
•
To charge your phone,
Sony Ericsson strongly recommends that you use only
Sony Ericsson branded original batteries, a power supply which is in accordance
with specification YD/T 1591-2006 (a Communications Industry standard of P. R.
China), and the USB cable supplied with your phone
. The use of third-party products
may decrease the performance of your phone and/or pose a risk to your health or safety
You can charge the battery for more or less than 3 hours. Interrupted charging does not damage
the battery. Performance depends on temperature, signal strength, usage patterns, features
selected and voice or data transmissions. The standby time for this battery is up to
260
hours.
Use only Sony Ericsson branded original batteries intended for use with your mobile phone. If
you use other batteries you may not be able to charge your phone.
To turn on the phone
1
Press and hold down the
key on the top of the phone.
2
Enter your SIM card PIN, if requested, and select
OK
.
Your PIN is supplied by your network operator. If you want to correct a mistake made while
entering your SIM card PIN, press .
To turn off the phone
1
Press and hold
until the options menu opens.
2
In the options menu, tap
Power off
.
9
This is an Internet version of this publication. © Print only for private use.
