Sony A8i G, Extended User Manual

Page: 32 / 52

TrackID™ Application
TrackID™ is a music identification service. When you listen to the music piece from a
speaker or from the radio, you could search the track by title, artist or name of the album.
In order to get the best performance, it is advisable to use the TrackID™ application in a
low noise environment.
Not all the countries/regions
（
or all the networks and/or service providers in the regions
）
support the TrackID™ application and TrackID™ service.
Before using TrackID™ application, please confirm the network data connection has been setup
in a correct manner.
To open the TrackID™ application
• From the
Home
screen
，
find and tap
TrackID™
.
To search for track information
1 When the TrackID™ application is open, tap
Record
.
2 Hold the phone towards the music source. The results are shown in the result screen.
Radio
You could browse and listen to FM radio programs and save them as “My Favorites”. You
could listen to the radio with portable handsfree, Headphone or speaker of the mobile
phone. Portable handsfree or headphone must be connected, since they are used as the
antenna of the FM radio. When you open the FM radio, the channels that you could listen
to will be displayed automatically. If there were RDS information on certain channel, the
information will be displayed several seconds after you start listening.
Do not listen to the radio in areas where the use of mobile phone is forbidden.
To turn on the radio
• Find and tap FM Radio in the Home screen.
The portable handsfree or headphone which work as antenna, must be connected. When it is
used for the first time, you will be asked if you want to search for the channels automatically.
To search the channels automatically
1 Tap to display the control list in the interface where the radio is played.
2 Tap Auto Search and Save .
To save the channel
1 Tap to display the control list in the interface where the radio is played.
2 Tap Save channel .
Channel management
1 Tap > Channel List
2 Tap to show menu.
To fine tune the frequency
• Tap or in the interface where the radio is played, and change the frequency in
a 0.1Mhz step.
To search channel
• Tap the or in the interface where the radio is played.
To change the output mode
• Tap > Headset / Speaker in the interface where the radio is played.
32
This is an Internet version of this publication. © Print only for private use.