Sony A6500, Help Manual

Page: 570 / 585

On moisture condensation
If the product is brought directly from a cold to a warm location, moisture may condense inside or outside the
product. This moisture condensation may cause a malfunction of the product.
To prevent moisture condensation when you bring the product directly from a cold to a warm location, first put it in a
plastic bag and seal it to prevent air from entering. Wait for about an hour until the temperature of the product has
reached the ambient temperature.
If moisture condensation occurs, turn off the product and wait about an hour for the moisture to evaporate. Note that
if you attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images.
On image data compatibility
This product conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan
Electronics and Information Technology Industries Association).
Playback of images recorded with your product on other equipment and playback of images recorded or edited with
other equipment on your product are not guaranteed.
Notes on playing movies on other devices
XAVC S movies can be played back only on XAVC S-supported devices.
On the monitor, viewfinder and lens
Do not press against the monitor. The monitor may be discolored and that may cause a malfunction.
If the monitor has drops of water or other liquids on it, wipe it with a soft cloth. If the monitor stays wet, the surface of
the monitor may change or deteriorate. This may cause a malfunction.
If the subject is too close, the image may show any dust or fingerprints on the lens. Wipe the lens with a soft cloth,
etc.
Make sure not to bump the lens or subject it to force.
Do not carry the camera by the monitor.
When using the power zoom lens, be careful not to get your fingers or any other objects caught in the lens.
Notes on the flash
Do not cover the flash with your fingers.
Do not carry the product by the flash unit, or use excessive strength on it.
If water, dust or sand get into the open flash unit, it may cause a malfunction.
When pushing down the flash unit, be careful not to catch your fingers.
Notes on discarding or transferring this product to others
When discarding or transferring this product to others, make sure to perform the following operation to protect private
information.
Select [Setting Reset] → [Initialize] → [OK] → [OK].
Notes on location information
If you upload and share an image tagged with a location, you may accidentally reveal the information to a third party. To
prevent third parties from obtaining your location information, set [
Loc. Info. Link Set.] to [Off] before shooting images.
4-689-270-12(1) Copyright 2016 Sony Corporation
570