Sony A6500, Help Manual

Page: 496 / 585

Help Guide
Interchangeable Lens Digital Camera
ILCE-6500
α6500
Wi-Fi Settings: WPS Push
If your access point has the Wi-Fi Protected Setup (WPS) button, you can register the access point to this product easily
by pushing the Wi-Fi Protected Setup (WPS) button.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-
Fi Protected Setup (WPS) button method. If the security setting is set to WEP or your access point does not support the Wi-Fi
Protected Setup (WPS) button method, perform [Access Point Set.].
For details about the available functions and settings of your access point, see the access point operating instructions or contact
the administrator of the access point.
A connection may not be enabled depending on the surrounding conditions, such as the type of wall material or if there is an
obstruction or poor wireless signal between the product and access point. If that happens, change the location of the product or
move the product closer to the access point.
Related Topic
Wi-Fi Settings: Access Point Set.
4-689-270-12(1) Copyright 2016 Sony Corporation
MENU → (Wireless) →[Wi-Fi Settings] → [WPS Push].
1
Press the WPS button on the access point you want to register.
2
496