Sony 3-283-040-11(1) Operating Instructions Manual Download Page 57

Page: 57 / 116

Dis

test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.

Set the [TEST TONE] to [ON].

Press

repeatedly to select the

desired speaker and the level.

Press .

Repeat Steps 1 to 3.

Press

repeatedly to set [TEST

TONE] to [OFF] after adjusting the
speaker level.

Note

• The test tone signals are not output from the HDMI

OUT jack.

Tip

• To adjust the volume of all the speakers at one time,

turn the VOLUME control on the unit, or press
/– on the remote.

• To return to the default setting when changing a

setting, select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not return to
the default setting.

Summary of Contents for 3-283-040-11(1)





















































































































Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands

Sony 3-283-040-11(1), Operating Instructions Manual

Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands