Sony 3-283-040-11(1) Operating Instructions Manual Download Page 12

Page: 12 / 116

Gettin

Star

ted

Connect the speaker cords to the speaker.

Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord
with the color tube to

, and the speaker cord without the color tube to

Attach the post to the base.

Insert the post so that the slit on the lower part of the post aligns with the projection of the base,
then secure the post with the two screws.

Note

• Make sure that the slot on the post aligns with the projection of the base by rotating the post slightly.

Rear of the speaker

Color tube
Front speaker (L): White
Front speaker (R): Red

Base

Post

Slit

Screws
(small)

Projection

Summary of Contents for 3-283-040-11(1)





















































































































Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands

Sony 3-283-040-11(1), Operating Instructions Manual

Search results

Summary of Contents for 3-283-040-11(1)

Reviews:

Related manuals for 3-283-040-11(1)

Brands by name

Popular brands