Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
79
GB
1
Place the S-AIR sub unit that you want
to pair near the unit.
Note
• Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit, see “To set the ID
• To set the ID of the S-AIR sub unit, refer
to the operating instructions of the S-AIR
sub unit.
3
Press FU/– repeatedly until
“DVD” appears in the front panel
display.
4
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
5
Press
X
/
x
to select
[SETUP],
then press
.
The options for [SETUP] appear.
6
Press
X
/
x
to select [CUSTOM], then
press .
The Setup Display appears.
7
Press
X
/
x
to select [AUDIO SETUP],
then press
.
The options for [AUDIO SETUP] appear.
8
Press
X
/
x
to select [S-AIR SETUP
t
],
then press
.
Note
• When the wireless transmitter is not inserted in
the unit, [S-AIR SETUP] cannot be selected.
9
Press
X
/
x
to select [PAIRING], then
press .
The confirmation display appears.
10
Press
C
/
c
to select [YES], then press
.
The unit starts pairing.
To not perform pairing, select [NO].
11
Start pairing of the S-AIR sub unit.
x
For the surround amplifier
Refer to the operating instructions of the
surround amplifier.
When sound transmission is established,
the confirmation display appears.
x
For the S-AIR receiver
Refer to the operating instructions of the
S-AIR receiver.
When sound transmission is established,
the confirmation display appears.
Note
• Perform the pairing within several minutes after
Step 10. If you do not, the pairing is canceled
automatically and the confirmation display
appears. To perform pairing, select [YES]. To
return to the previous display, select [NO].
12
Press
C
/
c
to select the next operation.
x
To finish pairing
Select [NO], then press
.
x
To perform pairing of another S-AIR
sub unit
Select [YES], then press
.
Note
• If you perform the pairing operation between the unit
and another S-AIR sub unit (page 78), sound
transmission established by ID is canceled.
• When you perform pairing, [(PAIRING)] appears
beside ID on the display for selecting ID.
To cancel pairing
Perform the ID setting of the unit according to
the procedure of “To set the ID of the unit.” If
you select a new ID (you can select the same ID
as before), pairing is canceled.
This unit
ID A
S-AIR sub unit
ID A
ID A
S-AIR sub unit
Your room
Neighbor
Pairing
No transmission
Summary of Contents for 3-283-040-11(1)
Page 115: ......
