Sony 2005 SXRD KDS-R50XBR1, Disassembly Manual

Page: 6 / 31

4
Chapter 2 - Rear & Sub Plastic Cover Removal
Screws
Rear and Sub Plastic Cover Removal & ASU-Board Access
1
Remove 9 screws and pull rear
plastic cover straight back and
off.
Detach
AC Cord
2
Remove 5 screws and detach
AC cord from the slot. Pull sub
plastic cover slowly straight
back and off.
NOTE: Be careful of fan wire
and connector behind sub-
cover. Disconnect fan cable to
completely remove cover.
Screws
Shields
Screws
Release Wire Tie
Bracket
3
Remove 4 screws and release
the one wire tie. Slide the
bracket up slightly and pull off.
Disconnect the S1-Board
Remove both shields to access
the ASU-Board.
CN2006
CN2010
CN2100
4
The ASU-Board can be probed
for troubleshooting at this point
of the disassembly process. It
can not be remove at this point .
Reference “ASU & G-Board
Removal” section.
S1-Board
Disconnect
fan cable
behind cover