20
7. DSU-Board Removal
DSU-Board Removal (cont.)
7
To remove the DSU-Board
continue to pull the DMB and
the DSU-Board assemblies
away from the Chassis frame
(swinging the assemblies to the
right).
Remove 6 screws, and squeeze
the two white tabs to release
the DSU-Board from the shield.
CAUTION:
Do not attempt to
pull board off at this point
because connectors on both
sides of the board must first be
disconnected.
Disconnect all connectors on
front and back-sides of the
DSU-Board.
Screws
Connectors
Tabs
Front-Side
LVDS Cables
(under tape)
Front-Side
Connectors
Summary of Contents for 2005 SXRD KDS-R50XBR1
