This is the Internet version of the user's guide. © Print only for private use.
38
Push to Talk (PTT)
PTT calls
To make a PTT call
1
Press
to access the PTT contacts list.
2
Select the contact or group you want to call.
Make sure the contact/group shows Available
(
/
) or Silent/Vibrate (
/
).
3
Press
to activate the call. After the tone
sounds you have the floor and may begin
speaking.
4
Hold the PTT key down while speaking.
Release it when you are not.
5
To end the PTT session, turn off the speaker
and close the phone or press
More
}
End Call
.
You will be automatically disconnected if there
is no activity for 30 seconds.
To receive a PTT call
1
For the best results, set your ringer to the highest
volume setting.
2
If your status is available, a tone signals an
incoming PTT call. The caller’s information
appears on the screen and you automatically
hear the caller’s voice.
3
When the phone is in silent mode, the caller’s
information appears. A vibrating alert replaces
the tone. You must manually accept the PTT
call when the phone is in silent mode.
•
Answer
– transfers the caller’s voice to the
ear speaker.
•
Busy
– ends the call. PTT calls are not
forwarded to voicemail.
To end a PTT call
Either wait for the call to time out from inactivity
or press
End Call
.
To make a Quick Group Call
Make a PTT group call without previously
creating a PTT group.
1
}
to access your contact list.
2
Highlight the first member of the Quick Group.
3
Press
Mark
to select group members from
the list.
4
Press
Continue
.
5
Press and hold
to call.
• Leave a voicemail for the Quick Group.
• Save the Quick Group.
If the clamshell is closed, the Contacts screen appears
on the external display. Use the volume keys to scroll
through the list.