background image

 
 
 
 

 

Trouble Shooting Guide, Mechanical

 

 

4/00021-1/FEA 209 544/89 A 
Company Internal 

 Sony Ericsson Mobile Communications AB 

23(26) 

 

11 Other 

11.1 Camera 

Problem 

• 

Make a general visual inspection for misuse, corrosion or oxidation from liquid damage 
according to point 1.2 

• 

Turn on the phone. Go to the service test menu; choose “Camera” and open the shutter.  
The viewfinder will be visible in the LCD.  

Note: if the flip is open the picture will be upside down 

• 

Check if the 1.3M CCD camera (Fig. 11.1) is working properly; verify the viewfinder 
functionality in the LCD.  

• 

Check if the camera flex film is fitting correct into the FPC connector (Fig. 11.2) and 
check if the connector is closed. 

• 

Check if there are black spots and if the picture is in focus. Replace the camera module if 
necessary. 

If the fault still occurs, try to update the phone to the latest available software version. If this 
doesn’t solve the problem, handle the unit according to the local directives. 

 

 

Fig. 11.1 

Fig. 11.2 

11.2 Camera 

shutter 

• 

Make a general visual inspection for misuse, corrosion or oxidation from liquid damage 
according to point 1.2 

• 

Check if the camera shutter works properly. Check if it loose and if it will close tight. 
Replace the frame camera cover (Fig. 11.3) and the cover camera right & left (Fig. 11.4) if 
necessary. 

 

Summary of Contents for S700c



























Reviews: